The BIOROCK uses a settlement tank made for us by ConderThese raw sewage tanks are available either as :- Class 1 - Concrete base, straps and granular backfill
Class 2 - Full concrete base and surround
The Class 1 settlement tanks are more expensive to buy but cheaper and easier to install - the choice is yours. Sizes are as follows:-
We can also supply full drawings for you to build your own raw sewage settlement tank using concrete and blocks. This is useful for the Isle of Man and the Scottish Islands, where transportation of large tanks is expensive. As the BIOROCK fits on pallets, they are relatively cheap to transport. For larger BIOROCK modular systems, the settlement tanks are sized individually.
![]() TANK DRAWING DOWNLOADS2800 Litre used with the BIOROCK 6
4500 Litre used with the BIOROCK 12
7000 Litre used with the BIOROCK 18
![]() If required, as an option, we can also supply the BIOROCK settlement tank from Germany. This is a polyethylene tank in the same mould as the BIOROCK. It requires only a dry cement/sand mix backfill, but it is more expensive than the Conder tank. The photo on the right shows the BIOROCK settlement tank pushed up to the Biorock 6 plant. For the installation there is a min. 500mm. gap for the air pipe between the 2 units. |
The ONLY totally sustainable sewage treatment plant.Create An Online Shop |